Mar 11, 2019
if statements¶The if statement allows you to execute pieces of code only if a given logical statement is True. Logical statements are any piece of code which yields a True or False value (typically, used with ==, is, >, <, etc).
if statements follow the basic format
if <logical statement is True>:
do this codeExamples:
# This if statement evaluates as True
a = 5
if a < 10:
print("a is less than 10!")
# This if statement evaluates as False.
# Note that there is NO output!
a = 5
if a > 10:
print(a, "is greater than 10")
if statements can be used in conjunction with else statements to create if/else statements. These statements execute code inside the if if the logical statement is True, and if the statement is False, code inside the else block is executed.
if/else statements follow the basic format
if <logical statement is True>:
do this code
else:
do this code insteadExamples:
# Either code inside the "if" or code inside the
# "else" gets executed - not both!
a = 5
if a > 10:
print(a, "is greater than 10")
else:
print(a, "is less than or equal to 10")
There are also constructs known in python as elif ("else if"), which allow you to test multiple conditions.
if/elif/ese statements follow the basic format
if <logical statement is True>:
do this code
elif <some other logical statement is True>:
do this code instead
else:
do this code if nothing above was true.You can have as many elif statements, following an initial if statement, as you want. It is not strictly necessary to end with else, but typically you will want to do so. In a given if/elif.../else construct, only one of the conditions will run. Should an if or elif evaluate to True, python will simply run that code and ignore the rest.
Examples:
a = 6
b = 22
if a > b:
print(a, "is greater than", b)
elif a < b:
print(a, "is less than", b)
else:
print(a, "is equal to", b)
Note that multiple if statements in a row are entirely distinct. If you have an if statement followed by another if statement, they can both be run. Further, elif and else statements are connected only to the most recent if statement preceding them.
s = "elephant"
if len(s) < 50:
print(s, "is shorter than 50 characters")
if len(s) < 30:
print(s, "is shorter than 30 characters")
else: # this goes with `len(s) < 30`, NOT with `len(s) < 50`
print(s, "is longer than 30 characters")
Problem 1:
a) Define a numeric variable (either float or integer is ok). Use an if/else statement to determine if the number is greater than zero. Your code should print a sentence indicating if the number is greater than zero or not.
b) Modify your if/else statement to write an if/elif/else statement to determine if the number is greater than, less than, or equal to zero. Again, print a sentence indicating the number's value relative to 0.
# if/else statement
b = 926
if b > 0:
print(b, "is greater than 0.")
else:
print(b, "is not greater than 0.")
# if/elif/else statement
b = -15
if b > 0:
print(b, "is greater than 0.")
elif b < 0:
print(b, "is less than 0.")
else:
print(b, "is equal to 0.")
Problem 2:
a) Write an if/else statement to test the single condition, whether the length of the list mylist (defined below) is less than or equal to 10. If this condition is true, use indexing to create a new list called newlist that contains the first three numbers mylist. If this condition is false, use indexing to create a new list called newlist that contains the first 7 numbers in the list.
Once newlist is defined, determine and print its sum. (Hint: use the function sum().)
b) Use an if/else statement to determine if the sum is even or odd. Print your result. (Hint: use the modulus operator % to test even vs. odd.)
# Use this list to solve Problem 2:
mylist = [19, 3, 2, 88, 56, 57, 11, 19, 9, 95]
# Create newlist based on length of mylist
if len(mylist) <= 10:
newlist = mylist[:3]
else:
newlist = mylist[:7]
# Determine the sum of newlist
result = sum(newlist)
print("The sum of newlist is", result)
# Determine if result is even or odd
if result % 2 == 0:
print("The sum is even.")
else:
print("The sum is odd.")
Problem 3:
Write an if/elif.../else construct to determine the type of the variable a, defined below.
Your code should evaluate if the variable is one of the following types: integer (int), float (float), string (str), or list (list). Your code should print a sentence stating the variable type (e.g. "89.44 is a float").
# Use this variable to solve Problem 3:
a = 89.44
if type(a) is int:
print(a, "is an integer.")
elif type(a) is float:
print(a, "is a float.")
elif type(a) is list:
print(a, "is a list.")
elif type(a) is str:
print(a, "is a list.")
for loops¶for loops are used in two main circumstances:
They follow the basic format
for item in container:
do this command
do that commandThe item is known as a "loop variable". At each iteration of the loop, the variable item takes on a specific value corresponding to that iteration. This variable will change at each new iteration of the loop.
Examples of looping over lists, strings, dictionaries:
# Loop over a list
mylist = [1, 2, 3, 4]
for i in mylist:
print(i)
# Loop over a string
for letter in "abcdefg":
print(letter)
# Loop over a dictionary (loops over the keys!)
d = {"a":1, "b":2, "c":3, "d":4}
for key in d:
print(key) # prints the key
print(d[key]) # prints the key's value
print() # using print on its own will print a blank line
Oftentimes, counter variables are used in loops to keep track of which iteration you're on.
i = 0 # Define counter variable
for x in [3, 6, 9, 12]:
print(x)
i += 1 # Increment the variable i by 1 with the += operator
print("We just finished iteration number", i)
To perform an action a specific number of times, the range() statement is commonly used:
# `range(10)` corresponds to all numbers from 0 to 9:
for i in range(10):
print(i)
# `range(2, 13)` corresponds to all numbers from 2 to 12:
for i in range(2, 13):
print(i)
# `range(4, 20, 2)` corresponds to all numbers from 4 to 19 in steps of 2:
for i in range(4, 20, 2):
print(i)
Problem 1:
a) Write a for loop that iterates over the numbers 0-10 (including 10!). On each iteration, print 2 raised to that iteration count. For example, when the loop variable equals 3, your code should print 8. (Hint: In Python, powers are calculated with the ** operator.)
b) Modify your code from part (a) to save each of those power-of-2 values to a list called powers (hint: use the .append() method). Print the final powers list.
# Print the powers of 2
for i in range(11):
print(2**(i))
# Save powers to a list
powers = [] # make empty list
for i in range(11):
powers.append(2**i) # add power value to list
print(powers) # print the final list
Problem 2: Two variables are defined in the code chunk below: the string protseq, which contains a sequence of amino acids, and the dictionary amino_weights, which gives the molecular weight for each amino acid. Write a for loop to determine the total molecular weight of protseq. Print the total weight.
# Use these two variables to solve Problem 2:
protseq = "RTAHHCPLKLLAWS"
amino_weights = {'A':89.09, 'R':174.20, 'N':132.12, 'D':133.10, 'C':121.15,
'Q':146.15,'E':147.13,'G':75.07,'H':155.16,'I':131.17,
'L':131.17,'K':146.19,'M':149.21,'F':165.19,'P':115.13,
'S':105.09,'T':119.12,'W':204.23,'Y':181.19,'V':117.15}
weight = 0. # Start with zero weight. The period in 0. is critical,
# it tells Python that `weight` is a floating-point number.
for aa in protseq:
weight += amino_weights[aa]
print(weight)
if and for¶The if and for constructs are frequently combined, for example when we loop over all elements in a list and check whether the elements meet some condition.
Examples:
# Evaluate a condition on every element in a list
mylist = [8, 472, -185, 0, -778.2, 23, 90, -0.003]
for i in mylist:
if i > 0:
print(i, "is positive")
elif i < 0:
print(i, "is negative")
else:
print(i, "is 0")
# Find the sum of all the multiples of 3 that are <=30.
result = 0 # this variable will hold our result
for i in range(1, 31):
if i%3 == 0: # the % sign is the modulo operator, which produces the remainder after division
result += i
print("The sum of all multiples of 3 which are <= 30 is", result)
# test whether a sequence is RNA or DNA by seeing if it contains the letter U
seqs=['AUUGAC', 'AGACT', 'CGATAGCA', 'UCCAGAC', 'UGGACU', 'TAGCAGA']
for seq in seqs:
if 'U' in seq and 'T' not in seq:
print(seq, "is probably RNA")
elif 'T' in seq and 'U' not in seq:
print(seq, "is probably DNA")
elif 'T' in seq and 'U' in seq:
print(seq, "has both T and U. I don't know what it is!")
elif 'T' not in seq and 'U' not in seq:
print(seq, "has neither T nor U. I don't know what it is!")
else:
print("Error: This line should never be executed.")
Problem 1: Loop over the dictionary d, defined below. For each key, determine if it contains the letter "o". If this condition is true, print the value from d associated with that key. Otherwise, print the statement "Sorry, no 'o' in the key XXX", where XXX is the name of the key.
# Use this dictionary to solve Problem 1:
d = {"frog":"amphibian",
"crocodile":"reptile",
"osprey":"bird",
"platypus":"mammal",
"squid":"mollusk",
"spider":"arachnid",
"jellyfish":"cnidarian",
"clownfish":"fish"}
for item in d:
if "o" in item:
print(d[item])
else:
print("Sorry, no 'o' in the key", item)
Problem 2: Two variables are defined in the code chunk below: the string protseq_ambig, which contains a sequence of amino acids, and the dictionary amino_weights, which gives the molecular weight for each amino acid. Unlike the previous exercise on molecular weight, this time the amino acid sequence contains ambiguous amino-acid characters, including X, B, and Z, which are not in the amino_weights dictionary. Write a for loop to determine the total molecular weight of protseq_ambig, ignoring all amino acids that are ambiguous. Print the total weight.
# Use these two variables to solve Problem 2:
protseq_ambig = "TAGHHABAAXARBYEDEEZKMBPXQ"
amino_weights = {'A':89.09, 'R':174.20, 'N':132.12, 'D':133.10, 'C':121.15,
'Q':146.15,'E':147.13,'G':75.07,'H':155.16,'I':131.17,
'L':131.17,'K':146.19,'M':149.21,'F':165.19,'P':115.13,
'S':105.09,'T':119.12,'W':204.23,'Y':181.19,'V':117.15}
weight = 0.
for aa in protseq_ambig:
if aa in amino_weights:
weight += amino_weights[aa]
print(weight)